Manual multiple filter wheel

Manual multiple filter wheel

€91.00

Available - (Tax Included)

BrandGeneric

FW version

Manual multiple filter wheel. Very well made and with a price hard to beat!



Manual multiple filter wheel. Very well made and with a price hard to beat!

Available in 3 versions:

  • 5 x 1,25" Filter:
    • Suitable for almost any telescope, will fit 1.25" eyepiece holders or standard M-42 "T" thread
    • Holder for 5 threaded 1.25" filters
    • Manual operation
    • Made of anodized aluminum
    • M-42 "T" thread or 1.25" male tube to fit telescope
    • Also M-42 or 1.25" female to fit eyepiece or camera
    • Big M-42 "nut" to adjust camera position
    • Size: 130x130x20mm
    • Weight: 305gr. (without adaptors)
    • 5 included adapters:
      • M-42 male / eyepiece holder 1.25"
      • 1.25" male / M-42 male
      • M-42 male / male
      • M-42 aluminum cover
      • Big M-42 nut for camera tilt adjustment
  • 9 x 1,25" Filter:
    • Easily change up to 9 filters with the 1,25" filter wheel
    • Manual operation
    • Made of anodized aluminum
    • Especially useful for images but can be used by the discriminating visual observer as well.
    • Suitable for almost any telescope
    • Weight: 470 gr.
    • Each position with "click stop"
    • Size: 21x158 mm (width by diameter)
    • Camera conection: M-42 female with adapter M-42 male-male
    • Telescope conection: M-42 female with adapter M-42 to1,25"
    • Allen wrench included
  • 5 x 2" Filter:
    • Easily change up to 5 filters with the 2" filter wheel
    • Manual operation
    • Made of anodized aluminum
    • Especially useful for images but can be used by the discriminating visual observer as well
    • Suitable for almost any telescope
    • Weight: 675 gr. (aprox.)
    • Each position with "click stop"
    • Size: 22,5x158mm (width by diameter). Width between the M48 male: 28.5mm.
    • Telescope conection: M54 demale
    • Camera conection: M48 female
    • 6 included adapters: (see the drawing below)
      • M-48H a M54M (width 3.9mm.)
      • M-48M to 2"
      • Internal thread M-48H
      • M-48M to M-48M
      • Adjustment washer for M-48 (*) Remove 4mm between male / male and washer
      • Eyepiece holder 2" to M-48
      • Allen wrench included
We use cookies to provide and improve our services. By using our site, you consent to cookies. OK Learn More